Search for: All records

To support the ever-growing demand for faster, energy-efficient computation, more aggressive scaling of the transistor is required. Two-dimensional (2D) transition metal dichalcogenides (TMDs), with their ultra-thin body, excellent electrostatic gate control, and absence of surface dangling bonds, allow for extreme scaling of the channel region without compromising the mobility. New device geometries, such as stacked nanosheets with multiple parallel channels for carrier flow, can facilitate higher drive currents to enable ultra-fast switches, and TMDs are an ideal candidate for that type of next generation front-end-of-line field effect transistor (FET). TMDs are also promising for monolithic 3D (M3D) integrated back-end-of-line FETs due to their ability to be grown at low temperature and with less regard to lattice matching through van der Waals (vdW) epitaxy. To achieve TMD FETs with superior performance, two important challenges must be addressed: (1) complementary n- and p-type FETs with small and reliable threshold voltages are required for the reduction of dynamic and static power consumption per logic operation, and (2) contact resistance must be reduced significantly. We present here the underlying strengths and weaknesses of the wide variety of methods under investigation to provide scalable, stable, and controllable doping. It is our Perspective that of all the available doping methods, substitutional doping offers the ultimate solution for TMD-based transistors. 

Abstract Near-perfect light absorbers (NPLAs), with absorbance,$${{{{{{{\mathcal{A}}}}}}}}$$ $A$, of at least 99%, have a wide range of applications ranging from energy and sensing devices to stealth technologies and secure communications. Previous work on NPLAs has mainly relied upon plasmonic structures or patterned metasurfaces, which require complex nanolithography, limiting their practical applications, particularly for large-area platforms. Here, we use the exceptional band nesting effect in TMDs, combined with a Salisbury screen geometry, to demonstrate NPLAs using only two or three uniform atomic layers of transition metal dichalcogenides (TMDs). The key innovation in our design, verified using theoretical calculations, is to stack monolayer TMDs in such a way as to minimize their interlayer coupling, thus preserving their strong band nesting properties. We experimentally demonstrate two feasible routes to controlling the interlayer coupling: twisted TMD bi-layers and TMD/buffer layer/TMD tri-layer heterostructures. Using these approaches, we demonstrate room-temperature values of$${{{{{{{\mathcal{A}}}}}}}}$$ $A$=95% atλ=2.8 eV with theoretically predicted values as high as 99%. Moreover, the chemical variety of TMDs allows us to design NPLAs covering the entire visible range, paving the way for efficient atomically-thin optoelectronics.